The hoist is designed for carrying out tripping operations during geophysical surveys, as well as for blasting-perforation operations and other works in wells, including in the absence of a drilling rig (without teamwork of wells).
Item |
Value |
Symbol |
WLTMH-5GSV |
Assembly base-car chassis |
KamAZ – 63501 |
Maximum depth of the study, m: – for cable Ø 10.2 mm – for cable Ø 6.3 mm |
4,500 5,000 |
Maximum pulling force of the cable on the first two rows of winding on the elevator drum, kN, not less than |
60-8,000 |
Maximum shooting of cable on the first two rows of winding on the elevator drum at the maximum speed, kN, not less than |
60 |
Traction force of the cable on the first two rows of winding on the elevator drum at the maximum speed, kN, not less than |
14 |
Capacity on the lift drum, kW |
53 |
Maximum torque on the lift drum, kN * m |
21 |
Diameter of the logging cable for a two-section drum, mm, no more than |
10.2 and 6.3 |
Type of winch drive |
hydraulic |
Power supply circuits: – type of current – voltage, V – frequency, Hz – power consumption, kW, not more than |
reversed 220±10% 50±1 6 |
Length of power cable for connection of the lift to the power supply system of the well, m, not less than |
50 |
Length of grounding cable, m, not less than |
50 |
Overall dimensions of the hoist, mm, no more: – length – width – height |
11 000 2 550 4 000 |
Lifting height of the support (from the ground), m |
18 |
Load on the support, kgf, no more than |
6,000 |
Distance overhang (overhang – distance from the device to the nearest point of the platform), mm, not less than |
1500 |
Mass of the loaded transport, kg |
24,175 |
Total weight of the hoist, kg, no more than |
27,200 |
Maximum speed of movement of the lift, km / h |
60 |
Diameter of the drum flange, m |
1260 |
Reliability requirements: – average time between failures, h, not less than – mean time to recovery of a workable condition, h, not more than – average service life before write-off, years, not less than |
350 8 6 |