PGM Sampler Series

SCOPE OF APPLICATION

PGM-28-300

Oil and gas wells equipped with sucker rod pump

PGM-36(38, 42)-300, PGM-48-500

Oil and gas wells

PGM-38(48)-500

Oil and gas wells
is limited in use when viscous, waxy oils are present in the wellbore due to difficult circulation through the sampler reception chamber during its RIH to the sampling interval

FEATURES

Fluid and gas sampling is carried out into a sealed transportable container for subsequent analysis in laboratory conditions
Pressure and temperature recordings are taken during entire time the sampler is in the borehole
The sampler is conveyed to the target depth on a logging cable; it is controlled by applying voltage to the sampler from the surface using a standard logging power source
PGM samplers are software and hardware interfaced to the VULCAN surface system
In PGM-28-300 sampling is performed from the wellbore in a static position by swabbing method, which prevents sample degassing (suction type sampler)
While RIH of PGM-38(48)-500 the connection of the inner cavity of the container with the fluid in the wellbore is provided; when the tool is set at a given depth on command from the surface, the lower and upper valves on the container are closed providing sealing of fluid and gas sample under formation pressure (flowing sampler type); sampling is performed from the wellbore space

ADVANTAGES

Low weight and size
Easy to use
Tripping out oil and gas samples to the surface in a sealed container

SAMPLING OF FLUID AND GAS FROM ANNULUS

Challenge

Sampling of fluid and gas from annulus accompanied with pressure and temperature

Solution

PGM-28-300 Sampler

Fluid and gas samples are taken from annular space into a sealed transportable container in a static position by swabbing method, preventing sample degassing (suction-sampler) for their subsequent analysis in laboratory conditions. Pressure and temperature are recorded during entire time the sampler is in the borehole.

The sampler is wireline-delivered to the specified depth; it is controlled by applying voltage to the sampler from the surface using a standard logging power supply.